Assault Rifle Mount Muzzle Cup - Replacement Part

A notepad holder / bail is a very handy accessory for holding notes, directions or other documents either when parked or while riding. Constructed of formed and tumbled stainless steel, with a stainless steel clip bail riveted to the base. Includes, aluminum spacers, longer stainless steel bolts and 50 sheet notepad. Replacement notepads are available separately in Replacement Parts. Formerly BMW PN 71 60 2 452 888

The rifle mount requires a mounting bracket. Theses brackets are available for right or left side mounting. Though right side is normally the preferred side as it is the dismount side, a left side bracket is also available. Standard RH or LH brackets accommodate barrel lengths up to 14". The NEW Long Rifle Mounting bracket (available in March 2021) accommodates barrel lengths up to 18" (note length includes barrel + suppressor if equipped). Note that using the Long Rifle Mounting bracket raises the rifle stock above the radio box lid height and may partially obstruct the RH side rear pod emergency light, depending upon view angle. Note when using RH long rifle mount w/long barrels, we suggest ordering the heat shield to protect the muzzle cup from excessive exhaust heat. Formerly BMW PN 71 60 2 452 840 RH

FMS Accessories offer the rifle mount developed by BMW for use on the 2015+ R 1200/1250 RT-P models. The rifle mount features an adjustable barrel support that will accommodate barrel lengths up to 14" with standard mounts and up to 18" with the RH Long mounting bracket. These lengths include overall barrel length including suppressor if appropriate. The mount comes complete with a Santa Cruz Gunlocks shielded SC-1 lock with CA round key, new anti-magnetic lock shield built into rifle mount, shielded black wiring harness terminated for the BMW gun lock release plug, mounting hardware and instructions. New lower support variants are available with integrated sight shield, no sight shield, offered with standard muzzle cup or large muzzle cup for use with suppressors. Large muzzle cup can accommodate a suppressor with an OD up to 1 7/8" (1.875"). New super-cool lower support with integrated small heat shield + std. muzzle cup for std. mounts + can be used on long rifle mounts with barrel length up to 14". Note: A mounting bracket must be purchased separately for Std. RH, RH Long or Std. LH mounting orientation. When mounting long barrel rifles on RH side, we suggest ordering the heat shield to protect the muzzle cup or lower support with integrated heat shield. Note: For 2019+ F-Series models, request 25" gun lock cable in Instruction box.

USB sockets are becoming more commonly installed on motor fairings to assist officers with charging cell phones, helmet headsets, etc. However, many of the available sockets when connected to the fairing power socket confuse the BMW 2.5Ah battery charger by creating a small parasitic load. FMS has sourced a quick-charge 3.0 technology USB socket with an On-Off switch, enabling the officer to turn-off the socket when not in use, therefore not creating issues during battery charging (particularly off-season storage when connected to the fairing power socket outlet). Additionally, the USB has a digital voltmeter, enabling the rider to see the state-of-charge of the battery that the voltmeter is connected to (based on the connection type selected). The voltmeter is also visible through the waterproof cover. When connected to the auxiliary battery power source, the voltmeter provides an excellent indication of your auxiliary battery state-of-charge as well as when the motorcycle is charging the aux. battery. Formerly BMW PN 71 60 2 446 871 USB w/67" harness for aux. battery ACC II or III FMSA-EA-USB2 $45.00 USB w/BMW plugs for harness connection to auxiliary battery FMSA-EA-USB4 $45.00 USB w/"Y" harness to connect to main battery FMSA-EA-USB1 $49.00 USB w/harness for K26 models 2006-2009 FMSA-EA-USB5 $45.00 USB w/55" fused harness for main battery connection / universal fitment FMSA-EA-USB6 $55.00 USB Only (replacement - no harness) FMSA-EA-USB3 $25.00