FMS LVD Power Timer

The timer is activated when the ignition is turned ON and has the following features:

1. Direct connection to the motorcycle battery, with minimal parasitic load (less than .05 mA) when OFF, so the battery will not discharge noticeably when parked - even for long periods.
2. Selectable run-time after ignition OFF in 15 minute increments. Activate any or all of the DIP switches to total the amount of time you wish the FMS Timer to stay ON after ignition OFF.  Example: DIP #1 ON + #2 ON = 45 minute run-time after ignition OFF
3. LVD low voltage disconnect protection to save battery from severe discharge. The timer is programmed to shut-down when the voltage drops below 9v or 11v for more than 30 seconds regardless of remaining run-time, so that battery is not deep discharged which can otherwise permanently damage the battery. DIP switch #4 selectable for either 9v OFF or 11v ON. 9v for auxiliary batteries, 11v for primary batteries where MC restarting is required.
4. An LED indicator shows steady when IGN ON, blinks slowly after ignition-OFF to indicate run-time count-down function, blinks fast to indicate overload condition / self-protection.
5. The battery power line is fused directly up to a maximum of 15A.
6. The timer can be secured with screws through the holes provided (3.5" on center), or by using high quality Velcro.
7. The timer is potted to protect from weather, vibration and shock.
8. Made in USA exclusively for FMS Solutions, LLC

Free shipping is limited to the continental United States.  

Shipping charges apply to international shipments.