License Plate Emergency Light Mounts

Emergency light license plate mounting brackets are available for all three styles of auxiliary emergency lights sold by FMS Accessories. These plates are cut and formed steel with black powder coating, along with the appropriate stainless steel mounting screws, washers and Nylock nuts for the specified light model.
Free shipping
$39.00

Emergency light license plate mounting brackets are available for all three styles of auxiliary emergency lights sold by FMS Accessories.  These plates are cut and formed steel with black powder coating, along with the appropriate stainless steel mounting screws, washers and nylock nuts for the specified light model.

Note:  If installing license plate mount to an RT with civil bags, license plate spacer kit will be needed to provide clearance with the civil saddle bag.  Otherwise, the outside light mounting bolts will rub against the saddlebags.

Note that mounting of this or any other accessory does not alter the factory specified loading requirements of the motorcycle.

Free shipping is limited to the continental United States.  

Shipping charges apply to international shipments. 

Customers who bought this item also bought

Map Light - LED

FMSA-MT-MLLED
An LED map light is a useful addition to your motor, particularly in combination with the notepad holder, providing visibility along with a sliding red color filter. Formerly BMW PN 71 60 2 452 859
$114.00

Emergency Light Multiplier Module w/Harness for Two Additional LED Lights

FMSA-ELM
Many agencies wish to add more rear lighting when laptops are used and the radio box lid (with half of your lighting) is opened facing the sky. Adding additional emergency lighting to 2015 and newer R 1200/1250 RT-P models has been a challenge as the flasher board system capacity is limited to the full complement of lighting available from BMW and does not respond well to additional loads. The Emergency Light Multiplier (ELM) enables you to add up to 12 additional LED emergency lights! The harness for lights #1 & #2 are included in the ELM wiring harness. After selecting the ELM module, move to lighting to select the lights you wish the ELM to control such as the NEW Feniex Fusion LED lights.
$195.00

License Plate Spacer Kit

FMSA-LPSK
Spacers and bolts to space license plate emergency light mounting bracket 1/2" to the rear to allow room for assault rifle 30 round magazine when mounted on RH side.
$12.00

ET381 LED Flasher Connection Repair Plugs

FMSA-EL-FCHRP
ET381 LED Flasher Connection mating 18-position pin housing with 18 pins, for repair of wiring harness plug inside radio box. Typically due to fractured wires in flex harness between radio box plug strip and rear light pod (replace the flex harness when this happens). Replace over-heated pin housing and any overheated pins from the main wiring harness. Ensure that you have the tool to release the pins / sockets from the TE plug housings as well as a suitable crimp tool to ensure a proper / complete connection with the new pins or sockets on both the insulator and conductor crimps. Free shipping is limited to the continental United States. Shipping charges apply to international shipments.
$15.00