Lidar Gun Holsters

FMS Accessories is pleased to offer a Lidar gun holster adapter plate for use on all MY 2015 and later R 1200 / 1250 RT-P models. This plate can be used to adapt earlier 4-bolt Lidar & radar gun holsters from MY 2014 & earlier models to the current K52 generation. The plate is constructed of 12 GA stainless steel, tumble-finished, complete with stainless steel hardware and can be fitted on either the right or left side protection bar. Not required for any FMS Accessories Lidar gun holster! Plate comes with washer-head Torx bolts for top mounting position as well as a counter-sunk Torx bolt when flush installation is required. To use countersunk bolt, you will need to countersink the upper bolt location depending upon which side of the motorcycle you are installing the plate. Original Plate MY2015-2018 Formerly BMW PN 71 60 2 409 956 Tight Fitting Plate MY2019+ Formerly BMW PN 71 60 2 452 407 797

Locking Stalker RLR Lidar gun holster for BMW R 1200/1250 RT-P and the New F 750/850 GS-P, standard with all mounting hardware included. Powder-coated aluminum holster with steel mounting plate secures X-Series guns with less dust, dirt, bugs, etc. than open mounts. Tapered top entry makes it easier to guide gun into holster. Smooth sides reduce the chances of fairing damage from tip-overs. Aluminum constructions keeps holster from rusting if powder-coating wears off. Precision fit requires no padding to deteriorate over time. Key plunger lock secures gun from the thief of opportunity. Unit is complete with M5 SS Torx mounting screws for protection bar thread inserts. Select the mount and orientation for your model in the drop-down list Mounting Bracket Type. All locks are keyed the same for easy use within the agency. No adapter plate required for installation. See note below for newest Stalker RLR production changes.

Newly redesigned locking Stalker X-Series Lidar gun holster for BMW R 1200/1250 RT-P and the New F 750/850 GS-P, standard with all mounting hardware included. Powder-coated aluminum holster with steel mounting plate secures X-Series guns with less dust, dirt, bugs, etc. than open mounts. Tapered top entry makes it easier to guide gun into holster. Smooth sides reduce the chances of fairing damage from tip-overs. Aluminum constructions keeps holster from rusting if powder-coating wears off. Precision fit requires no padding to deteriorate over time. Key plunger lock secures gun from the thief of opportunity. Unit is complete with M5 SS Torx mounting screws for protection bar thread inserts. Select the mount and orientation for your model in the drop-down list Mounting Bracket Type. All locks are keyed the same for easy use within the agency. No adapter plate required for installation.

Locking LTI TruVision Lidar gun holster for BMW R 1200/1250 RT-P complete with all mounting hardware included. Select the mount and orientation for your model in the options section. Key plunger lock secures gun from the thief of opportunity. Select the mount and orientation for your model in the drop-down list Mounting Bracket Type. All locks are keyed the same for easy use within the agency.

Locking LTI TruSpeed Lidar gun holster for BMW R 1200/1250 RT-P and the New F 750/850 GS-P, standard with all mounting hardware included. Select the mount and orientation for your model in the options section. Powder-coated aluminum holster with steel mounting plate secures TruSpeed guns with less dust, dirt, bugs, etc. than open mounts. Aluminum constructions keeps holster from rusting if powder-coating wears off. Precision fit requires no padding to deteriorate over time. Key plunger lock secures gun from the thief of opportunity. Unit is complete with M5 SS Torx mounting screws for protection bar threaded inserts. Select the mount and orientation for your model in the drop-down list Mounting Bracket Type. All locks are keyed the same for easy use within the agency. No adapter plate required for installation. Free shipping is limited to the continental United States. Shipping charges apply to international shipments.

Locking LTI TruSpeed S Lidar gun holster for BMW R 1200/1250 RT-P and the New F 750/850 GS-P, standard with all mounting hardware included. Powder-coated aluminum holster with steel mounting plate secures TruSpeed S units with less dust, dirt, bugs, etc. than open mounts. Aluminum constructions keeps holster from rusting if powder-coating wears off. Key plunger lock secures gun from the thief of opportunity. Unit is complete with M5 stainless steel Torx mounting screws for protection bar threaded inserts. Select the mount and orientation for your model in the drop-down list Mounting Bracket Type. All locks are keyed the same for easy use within the agency. No adapter plate required for installation - everything is included! Free shipping is limited to the continental United States. Shipping charges apply to international shipments.

Locking LTI UltraLyte Lidar gun holster for BMW R 1200/1250 RT-P and the New F 750/850 GS-P, standard with all mounting hardware included. Powder-coated aluminum holster with steel mounting plate secures UltraLyte guns with less dust, dirt, bugs, etc. than open mounts. Aluminum constructions keeps holster from rusting if powder-coating wears off. The unique construction of the UltraLyte gun requires adding a pad strip on each side of the gun body and one over sight housing (padding provided) to ensure the gun does not rattle. Fixed pad is in position in bottom of holster for front of gun. This method should reduce the likelihood that padding comes loose over time and allows for easier cleaning of the holster. Key plunger lock secures gun from the thief of opportunity. Unit is complete with M5 stainless steel Torx mounting screws for protection bar threaded inserts and self-adhesive pad strips for gun. Select the mount and orientation for your model in the drop-down list Mounting Bracket Type. All locks are keyed the same for easy use within the agency. No adapter plate required for installation - everything is included! Free shipping is limited to the continental United States. Shipping charges apply to international shipments.

Locking LTI UltraLyte 20/20 Lidar gun holster for BMW R 1200/1250 RT-P, standard with bracket for mounting on right or left side of 2006 through 2014 models. Fits 2015+ RT-P models by using the adapter plate shown below. Constructed of steel formed wire with welded mounting brackets and lock plate. Powder-coated for attractive finish. All locks are keyed the same for easy use within the agency. Formerly BMW PN 71 60 2 452 885 Requires mounting Adapter Plate for MY2015+ RT-P models.

Locking PL-4 Lidar gun holster for BMW R 1200/1250 RT-P and the New F 750/850 GS-P, standard with bracket for right side mounting are available for immediate shipment. Select the mount and orientation for your model in the drop-down list Mounting Bracket Type. Powder-coated aluminum holster with steel mounting plate secures PL-4 guns with less dust, dirt, bugs, etc. than open mounts. Aluminum constructions keeps holster from rusting if powder-coating wears off. Precision fit requires no padding to deteriorate over time. Key plunger lock secures gun from the thief of opportunity. Unit is complete with M5 SS Torx mounting screws for protection bar threaded inserts. All locks are keyed the same for easy use within the agency. No adapter plate required for installation.

Locking PL-4 Lidar gun holster for BMW R 1200/1250 RT-P, standard with bracket for mounting on right or left side of 2006 through 2014 models. Fits 2015+ RT-P models by using the adapter plate shown below. Constructed of steel formed wire with welded mounting brackets and lock plate. Powder-coated for attractive finish. All locks are keyed the same for easy use within the agency. Formerly BMW PN 71 60 2 407 798 Requires mounting Adapter Plate for MY2015+ RT-P models.

Locking PL-3 Lidar gun holster for BMW R 1200/1250 RT-P and the New F 750/850 GS-P, standard with bracket for right side mounting are available for immediate shipment. Select the mount and orientation for your model in the drop-down list Mounting Bracket Type. Powder-coated aluminum holster with steel mounting plate secures PL-3 guns with less dust, dirt, bugs, etc. than open mounts. Aluminum constructions keeps holster from rusting if powder-coating wears off. Precision fit requires no padding to deteriorate over time. Key plunger lock secures gun from the thief of opportunity. Unit is complete with M5 SS Torx mounting screws for protection bar threaded inserts. All locks are keyed the same for easy use within the agency. No adapter plate required for installation.

Locking PL-3 Lidar gun holster for BMW R 1200/1250 RT-P, standard with bracket for mounting on right or left side of 2006 through 2014 models. Fits 2015+ RT-P models by using the adapter plate shown below. Constructed of steel formed wire with welded mounting brackets and lock plate. Powder-coated for attractive finish. All locks are keyed the same for easy use within the agency. Formerly BMW PN 71 60 2 452 886 Requires mounting Adapter Plate for MY2015+ RT-P models.

Locking Pro-Lite + Lidar holster for BMW R 1200/1250 RT-P and the New F 750/850 GS-P, standard with bracket for right side mounting are available for immediate shipment. Select the mount and orientation for your model in the drop-down list Mounting Bracket Type. Powder-coated aluminum holster with steel mounting plate secures Pro-Lite + Lidar with less dust, dirt, bugs, etc. than open mounts. Aluminum constructions keeps holster from rusting if powder-coating wears off. Precision fit requires no padding to deteriorate over time. Key plunger lock secures gun from the thief of opportunity. Unit is complete with M5 SS Torx mounting screws for protection bar threaded inserts. All locks are keyed the same for easy use within the agency. No adapter plate required for installation.

Locking early model Stalker Lidar gun holster for BMW R 1200/1250 RT-P, standard with bracket for mounting on right or left side of 2006 through 2014 models. Fits 2015+ RT-P models by using the adapter plate shown below. Constructed of steel formed wire with welded mounting brackets and lock plate. Powder-coated for attractive finish. All locks are keyed the same for easy use within the agency. Formerly BMW PN 71 60 2 452 886

Locking DragonEye Speed Lidar gun holster for BMW R 1200/1250 RT-P and the New F 750/850 GS-P, standard with bracket for right side mounting are available for immediate shipment. Select the mount and orientation for your model in the drop-down list Mounting Bracket Type. Powder-coated aluminum holster with steel mounting plate secures DragonEye guns with less dust, dirt, bugs, etc. than open mounts. Aluminum constructions keeps holster from rusting if powder-coating wears off. Precision fit requires no padding to deteriorate over time. Key plunger lock secures gun from the thief of opportunity. Unit is complete with M5 SS Torx mounting screws for protection bar threaded inserts. All locks are keyed the same for easy use within the agency. No BMW adapter plate required.

Locking DragonEye Compact Lidar gun holster for BMW R 1200/1250 RT-P and the New F 750/850 GS-P, standard with bracket for right side mounting are now available for immediate shipment. Note that left side mounting will work fine, but holster is not mirror image, so the cut-out is to the inside face. Select the mount and orientation for your model in the drop-down list Mounting Bracket Type. Powder-coated aluminum holster with steel mounting plate secures DragonEye Compact guns with less dust, dirt, bugs, etc. than open mounts. Aluminum constructions keeps holster from rusting if powder-coating wears off. Precision fit requires no padding to deteriorate over time. Unit locks in inverted position, but can be used unlocked in normal orientation. Key plunger lock secures gun from the thief of opportunity. Unit is complete with M5 SS Torx mounting screws for protection bar threaded inserts. All locks are keyed the same for easy use within the agency. No BMW adapter plate required.

Locking Sure Shot Lidar gun holster for BMW R 1200/1250 RT-P and the New F 750/850 GS-P, standard with bracket for right side mounting are now in stock for immediate delivery. Select the mount and orientation for your model in the drop-down list Mounting Bracket Type. Powder-coated aluminum holster with steel mounting plate secures Sure Shot guns with less dust, dirt, bugs, etc. than open mounts. Aluminum constructions keeps holster from rusting if powder-coating wears off. Precision fit requires no padding to deteriorate over time. Key plunger lock secures gun from the thief of opportunity. Unit is complete with M5 SS Torx mounting screws for protection bar threaded inserts. All locks are keyed the same for easy use within the agency. No adapter plate required for installation. Free shipping is limited to the continental United States. Shipping charges apply to international shipments.

Locking Kustom Talon radar gun holster for BMW R 1200/1250 RT-P, standard with bracket for mounting on right or left side of 2006 through 2014 models. Fits 2015+ RT-P models by using the adapter plate shown below. Constructed of steel formed wire with welded mounting brackets and lock plate. Powder-coated for attractive finish. All locks are keyed the same for easy use within the agency. Formerly BMW PN 71 60 2 452 884 Requires mounting Adapter Plate for MY2015+ RT-P models.

Many agencies are requesting an open storage box for their cite books, tablets, water bottles, etc. Mounts in front of protection bar so that it can be used with or without FMS Accessories Lidar gun holster. New tall ticket book box designed for dual and tri-fold ticket book wallets. Box measures 5.75" x 3" x 8" tall. Constructed from 0.100" aluminum sheet stock with black powder-coating. Mounting bracket constructed of black powder-coated steel for RH side mounting on MY 2015 and later R 1200 / 1250 RT-P models. Premium stainless steel mounting hardware included. Free shipping is limited to the continental United States. Shipping charges apply to international shipments. Note: The addition of this or other accessories does not change the overall load limits of your motorcycle - always adhere to the manufacturer's recommendations for loading.

Many agencies are requesting an open storage box for their cite books, tablets, water bottles, etc. FMS Accessories has developed a storage box for this purpose, with inside measurements of 8" tall x 6.5" long x 2.5" wide. Made of durable powder-coated aluminum attached to a powder-coated steel mounting bracket for LH or RH mounting on 2015 and later BMW R 1200 RT-P US models. Unit comes complete with three (3) M5 SS Torx mounting screws for protection bar threaded inserts. Now available for Zero DSR models fitted to RH protection bar. Now Available - special variant for the Zebra printer! Custom sized specifically for the Zebra printer used by so many agencies. Free shipping is limited to the continental United States. Shipping charges apply to international shipments. Note: The addition of this or other accessories does not change the overall load limits of your motorcycle - always adhere to the manufacturer's recommendations for loading.

FMS Accessories offer a custom-made box specifically for holding your Zebra or Brother Rugged Jet battery-operated printer (printer not included). Made of durable powder-coated aluminum attached to a powder-coated steel mounting bracket for LH or RH mounting on 2015 & later BMW RT-P US models. Also, now available in a RH Forward High Mount on the BMW adapter bracket or New RH Forward Low Mount, either of which can be combined with a Lidar gun holster. Forward low now comes in either straight or angled-in bracket choices. New Option: A key lock unit is now available which will allow you to lock your Zebra printer in the box, providing a measure of protection from the thief of opportunity.

Replacement Lidar gun holster mounts. Sold separately for use as a replacement part, or to change the mount when you upgrade to a different model motorcycle. All mounts have the 5-hole pattern used on FMS Accessory Lidar gun holsters, Zebra boxes, etc. Note that tight fitting brackets are used on narrow holsters to keep the gap between the holster and fairing from being too large. Not recommended for used with wider holsters.

Replacement mounts for various Tall Ticket Book / Zebra Printer Box mounts. Sold separately for use as a replacement part, or to change the mount when you upgrade to a different model motorcycle. Pay close attention to the photos as these mounts have subtle differences. Call for clarification at 201-264-8365 if in doubt.

Replacement key lock for Lidar gun holsters sold by FMS Accessories. Lock w/two keys - based on current key number being sold (E).