You have no items in your shopping cart.

Site Under Maintenance. Please do not place any orders for the time being. For urgent matters, kindly contact us at info@fmsaccessories.com.

Menu
Picture of Microphone Mount
Picture of Microphone Mount Picture of Microphone Mount Picture of Microphone Mount Picture of Microphone Mount

Microphone Mount

$29.00
FMS Accessories offers the bracket needed to mount the radio microphone or other accessories to the handlebars on the 2015 - 2022 R 1200 / 1250 RT-P models. A new version is also available that is 1.5" taller / forward off-set to work with radio heads that are mounted higher, where the microphone key could otherwise ride against the radio head. As used by AZ DPS. Note: Requires the special bolt kit listed in related products. Formerly BMW PN: 71 60 2 452 875
Availability: In stock

Add To Estimate

FMS Accessories offers the bracket needed to mount the radio microphone or other accessories to the handlebars on the 2015 - 2022 R 1200 / 1250 RT-P.  The bracket is made of 12 GA stainless steel and can be secured to the handlebar mount using a special bolt kit.  The bolt kits are available in standard length as well as +5mm longer bolt for use when multiple brackets are attached to one side.  The M10 Torx head bolt already has encapsulated thread locker on the bolt end - the Torx head enables you to apply the required 40 Nm of torque as specified by BMW without deformation.  
 
A new version is also available that is 1.5" taller / forward off-set to work with radio heads that are mounted higher, where the microphone key could otherwise ride against the radio head. As used by AZ DPS.
 
Note:  Always clean the threads in the handlebar using an M10 x 1.5 tap and use Loctite 243 on the new bolt when reinstalling if the encapsulation is worn. 
 
Free shipping is limited to the continental United States.
Shipping charges apply to international shipments. 

Customers who bought this item also bought

Picture of Radio Power Connection Plug Code A

Radio Power Connection Plug Code A

FMSA-EL-RPP
BMW 2.5 mm high current plug to connect radios and other devices to the radio power plug on your BMW motor. BMW plug Code A (black housing) supplied with two sockets for 14 - 18 AWG wire connections (w/conductor & insulation crimps). Formerly BMW PN 71 60 2 452 887
$10.00
Picture of Handlebar Accessory Mounting Bolt Kit

Handlebar Accessory Mounting Bolt Kit

FMSA-HBKS
FMS Accessories offers the bushing and bolt kit needed to mount various accessories to the handlebars on the K52 / 2015 - 2022 R 1200 / 1250 RT-P including radar remote controllers, microphone mounts, cell phone holders, etc. The kit includes a special aluminum bushing, stainless steel washer and pan-head stainless steel Torx head bolt. The kit is available in standard length as well as +5 mm and +10 mm longer bolts for use when multiple brackets are attached to one side. The M10 Torx head bolt already has encapsulated thread locker on the bolt end - the Torx head enables you to apply the required 40 Nm of torque as specified by BMW without deformation. Formerly BMW PN 71 60 2 452 841
$12.00
Picture of Radio Power Plug Divider

Radio Power Plug Divider

FMSA-EL-RPPD
Split the BMW 2.5 mm high current radio power connection (code A) on your BMW motors into two plugs when you need to use this power source to operate more than one item. Harness is made from high quality components with professional terminal crimps and PVC insulation over wires. BMW 2.5 mm Code A socket and pin housings (black) or Code B pin and socket housings (white). Code B is used to split the lighter socket power feed. Overall length: 5.5 inches Wire size: 16 AWG. New version with dual ATM fuse holders for faster installation of radios individually fused receiver and control head. Code A formerly BMW PN 71 60 2 452 880 Connector: BMW 2.5 mm Radio Power Connection Plug Code A. Note: Order two (2) mating Radio Power Connection Plugs with each Radio Power Plug Divider
$36.00
Picture of Notepad Holder

Notepad Holder

FMSA-MT-NPH
A notepad holder / bail is a very handy accessory for holding notes, directions or other documents either when parked or while riding. Constructed of formed and tumbled stainless steel, with a stainless steel clip bail riveted to the base. Includes, aluminum spacers, longer stainless steel bolts and 50 sheet notepad. Replacement notepads are available separately in Replacement Parts. Formerly BMW PN 71 60 2 452 888
$48.00

Related products

Picture of Handlebar Accessory Mounting Bolt Kit

Handlebar Accessory Mounting Bolt Kit

FMSA-HBKS
FMS Accessories offers the bushing and bolt kit needed to mount various accessories to the handlebars on the K52 / 2015 - 2022 R 1200 / 1250 RT-P including radar remote controllers, microphone mounts, cell phone holders, etc. The kit includes a special aluminum bushing, stainless steel washer and pan-head stainless steel Torx head bolt. The kit is available in standard length as well as +5 mm and +10 mm longer bolts for use when multiple brackets are attached to one side. The M10 Torx head bolt already has encapsulated thread locker on the bolt end - the Torx head enables you to apply the required 40 Nm of torque as specified by BMW without deformation. Formerly BMW PN 71 60 2 452 841
$12.00
Information
Customer service
Follow us
Powered by nopCommerce
Copyright © 2024 FMS Solutions, LLC. All rights reserved.