18-Wire Emergency Light Wiring Harness

FMS Accessories is pleased to offer a Lidar gun holster adapter plate for use on all MY 2015 and later R 1200 / 1250 RT-P models. This plate can be used to adapt earlier 4-bolt Lidar & radar gun holsters from MY 2014 & earlier models to the current K52 generation. The plate is constructed of 12 GA stainless steel, tumble-finished, complete with stainless steel hardware and can be fitted on either the right or left side protection bar. Not required for any FMS Accessories Lidar gun holster! Plate comes with washer-head Torx bolts for top mounting position as well as a counter-sunk Torx bolt when flush installation is required. To use countersunk bolt, you will need to countersink the upper bolt location depending upon which side of the motorcycle you are installing the plate. Original Plate MY2015-2018 Formerly BMW PN 71 60 2 409 956 Tight Fitting Plate MY2019+ Formerly BMW PN 71 60 2 452 407 797

A notepad holder / bail is a very handy accessory for holding notes, directions or other documents either when parked or while riding. Constructed of formed and tumbled stainless steel, with a stainless steel clip bail riveted to the base. Includes, aluminum spacers, longer stainless steel bolts and 50 sheet notepad. Replacement notepads are available separately in Replacement Parts. Formerly BMW PN 71 60 2 452 888

ET381 LED Flasher Connection mating 18-position pin housing with 18 pins, for repair of wiring harness plug inside radio box. Typically due to fractured wires in flex harness between radio box plug strip and rear light pod (replace the flex harness when this happens). Replace over-heated pin housing and any overheated pins from the main wiring harness. Ensure that you have the tool to release the pins / sockets from the TE plug housings as well as a suitable crimp tool to ensure a proper / complete connection with the new pins or sockets on both the insulator and conductor crimps. Free shipping is limited to the continental United States. Shipping charges apply to international shipments.

LED Flasher Connection 18-position socket housing with 18 sockets, for repair of wiring harness plug on 18-wire harness inside radio box. Typically due to fractured wires in flex harness between radio box plug strip and rear light pod (replace the flex harness when this happens). Replace over-heated socket housing and any overheated pins from the main wiring harness. Ensure that you have the tool to release the pins / sockets from the TE plug housings as well as a suitable crimp tool to ensure a proper / complete connection with the new pins or sockets on both the insulator and conductor crimps. Free shipping is limited to the continental United States. Shipping charges apply to international shipments.