LED Flasher Harness Repair Plug

The BMW Navigator mount was designed to enable mounting the traditional BMW Navigator GPS using a BMW Four Button cradle or a BMW Locking cradle (cradles & locks sold separately through BMW) onto the 2021 and later R 1250 RT-P models with TFT display. Also works with Garmin Zumo (select the 4-button cradle for this application). Not compatible with SAT radio antenna - if desired on unit with SAT radio antenna, antenna will need to be relocated* from the dashboard to the rear of the motorcycle for best reception. A new RFI shield has been developed to block much of the RF interference from the TFT display that was affecting the accuracy of the GPS signal (order separately below). Note: It has been reported that the Touratech GPS locking mounting cradle is heavier than the BMW cradles and may cause "bouncing" of the display.

Replacement hardware kit for TFT Display mounts for moving radar. Set includes four (4) 6mm plastic rivets and one (1) expandable locking grommet. Free shipping is limited to the continental United States. Shipping charges apply to international shipments.

ET381 LED Flasher Connection mating 18-position pin housing with 18 pins, for repair of wiring harness plug inside radio box. Typically due to fractured wires in flex harness between radio box plug strip and rear light pod (replace the flex harness when this happens). Replace over-heated pin housing and any overheated pins from the main wiring harness. Ensure that you have the tool to release the pins / sockets from the TE plug housings as well as a suitable crimp tool to ensure a proper / complete connection with the new pins or sockets on both the insulator and conductor crimps. Free shipping is limited to the continental United States. Shipping charges apply to international shipments.

Spacers and bolts to space license plate emergency light mounting bracket 1/2" to the rear to allow room for assault rifle 30 round magazine when mounted on RH side.