Electrical Repair

Crimp tool for crimping various pins and sockets for wiring harness repairs. Universal tool with excellent die cuts for performing both insulator and conductor crimps based on wire and terminal sizes. Free shipping is limited to the continental United States. Shipping charges apply to international shipments.

Extraction / release tool for TE DUAC pins and sockets for wiring harness repairs. Formerly BMW PN 71 60 2 452 847

Extraction / release tool for BMW 2.5 mm pins and sockets for wiring harness repairs. The BMW 2.5 mm terminals are high-current connectors used on the BMW radio power plug as well as the lighter socket / printer power connection plug. Tool has an integrated tube protector (yellow sliding protector) to reduce the likelihood of the extraction tube being damaged when not in use. Retract protector (slides back) into the handle when the tool is in use. Free shipping is limited to the continental United States. Shipping charges apply to international shipments.

Sourcing specialized electrical connections is not always easy, particularly when you only need a small number of items. FMS Accessories now offers a selection of hard-to-find connection parts to assist with the installation of police accessories or repair of police motors. If you do not find the item you are looking for, please contact us at info@fmsaccessories.com with a description and photograph of what you are looking for.

Sourcing specialized electrical connections is not always easy, particularly when you only need a small number of items. FMS Accessories now offers a selection of hard-to-find connection parts to assist with the installation of police accessories or repair of police motors. If you do not find the item you are looking for, please contact us at info@fmsaccessories.com with a description and photograph of what you are looking for. The 2.5 mm connectors are used by BMW for higher amperage loads such as radios and major power cable distribution. In most applications, these connections are not sealed, as they are utilized in compartments that are already weather-resistant.

Three-conductor pin or socket housings used to replace damaged connectors on the BMW side stand switch. Each connector is sold individually with contacts and seals. Note that seals of both main sizes (yellow and green) are provided, either for repair of an existing connection, or creation of a new connection.

Sourcing specialized electrical connections is not always easy, particularly when you only need a small number of items. FMS Accessories now offers a selection of hard-to-find connection parts to assist with the installation of police accessories or repair of police motors. If you do not find the item you are looking for, please contact us at info@fmsaccessories.com with a description and photograph of what you are looking for. 2-Position Pin Housing Code A is used for radio head extra speaker wire / map light / gun lock connections. 2-Position Pin Housing Code B is used for auxiliary LED light connections. 3-Position Pin Housing Code B is for GPS plug connections.

LED Flasher Connection 18-position socket housing with 18 sockets, for repair of wiring harness plug on 18-wire harness inside radio box. Typically due to fractured wires in flex harness between radio box plug strip and rear light pod (replace the flex harness when this happens). Replace over-heated socket housing and any overheated pins from the main wiring harness. Ensure that you have the tool to release the pins / sockets from the TE plug housings as well as a suitable crimp tool to ensure a proper / complete connection with the new pins or sockets on both the insulator and conductor crimps. Free shipping is limited to the continental United States. Shipping charges apply to international shipments.

ET381 LED Flasher Connection mating 18-position pin housing with 18 pins, for repair of wiring harness plug inside radio box. Typically due to fractured wires in flex harness between radio box plug strip and rear light pod (replace the flex harness when this happens). Replace over-heated pin housing and any overheated pins from the main wiring harness. Ensure that you have the tool to release the pins / sockets from the TE plug housings as well as a suitable crimp tool to ensure a proper / complete connection with the new pins or sockets on both the insulator and conductor crimps. Free shipping is limited to the continental United States. Shipping charges apply to international shipments.

Accessory connection plugs are used to connect accessories to the two-conductor plugs on the radio box terminal strip in positions 8, 9 and 10, referred in the BMW instructions as Accessory I, II or III. Three (3) two conductor socket housings along with six sockets are provided with each PN quantity selected. Formerly BMW PN 71 60 2 452 846

Accessory I through II plug 2-position pin housing with 2 pins for repair of the authority wiring harness inside the radio box on K52 models (R 1200/1250 RT-P) and K8X models (F 750/850 GS-P).

Helmet headset interface plug 8-position socket housing with 8 sockets, for connection or repair of helmet headset interface wiring. Formerly BMW PN 71 60 2 452 845

Helmet headset interface plug 8-position pin housing with 8 pins for repair of the authority wiring harness inside the radio box on K52 models (R 1200/1250 RT-P) and K8X models (F 750/850 GS-P). Free shipping is limited to the continental United States. Shipping charges apply to international shipments.

The radar connection plug is used to connect accessories (including moving radar) to the four-conductor plug on the radio box terminal strip in position 11, referred in the BMW instructions as Radar Connection on the K52 / 2015 - 2022 R 1200 / 1250 RT-P models. One four-conductor socket housing along with four sockets are provided with each PN quantity selected. Formerly BMW PN 71 60 2 452 849

Radar plug 4-position pin housing with 4 pins for repair of the authority wiring harness inside the radio box on K52 models (R 1200/1250 RT-P) and K8X models (F 750/850 GS-P). Free shipping is limited to the continental United States. Shipping charges apply to international shipments.

The radio speaker plug is used to connect radio speaker outputs to the six-conductor plug on the radio box terminal strip in position 12, referred in the BMW instructions as Fairing Speakers. One six conductor socket housings along with six sockets are provided with each PN quantity selected. Formerly BMW PN 71 60 2 452 844

Speaker plug 6-position pin housing with 6 pins for repair of the authority wiring harness inside the radio box on K52 models (R 1200/1250 RT-P) and K8X models (F 750/850 GS-P). Free shipping is limited to the continental United States. Shipping charges apply to international shipments.

The video system icon plug is used to connect the video icon cable from the rear pod flasher board. This enables the user to tap into the 12V icon signal for emergency lights, left & right turn signal and brake light. This is often used to trigger body cameras as well as provide on-screen icons for full video system use. Formerly BMW PN 71 60 2 452 843

Split the BMW 2.5 mm high current radio power connection (code A) on your BMW motors into two plugs when you need to use this power source to operate more than one item. Harness is made from high quality components with professional terminal crimps and PVC insulation over wires. BMW 2.5 mm Code A socket and pin housings (black) or Code B pin and socket housings (white). Code B is used to split the lighter socket power feed. Overall length: 5.5 inches Wire size: 16 AWG. New version with dual ATM fuse holders for faster installation of radios individually fused receiver and control head. Code A formerly BMW PN 71 60 2 452 880 Connector: BMW 2.5 mm Radio Power Connection Plug Code A. Note: Order two (2) mating Radio Power Connection Plugs with each Radio Power Plug Divider

BMW 2.5 mm high current plug to connect radios and other devices to the radio power plug on your BMW motor. BMW plug Code A (black housing) supplied with two sockets for 14 - 18 AWG wire connections (w/conductor & insulation crimps). Formerly BMW PN 71 60 2 452 887

BMW 2.5 mm high current pin housing with pins to connect radios and other devices to the radio power plug on your BMW motor. Supplied with two pins for 14 - 12 AWG wire connections (w/conductor & insulation crimps).

BMW 2.5 mm Code B connector to attach Brother Pocket Jet printer power cable to the power plug vacated by the terminal bracket / lighter socket when installing the pivoting laptop / low profile printer housing in BMW motors. Connect your Brother Pocket Jet printer power cable directly to the motorcycle without a power converter. Includes duplex 2.5 mm pin housing Code B and two 18 AWG 2.5 mm pins. Note: if you have the tool you can remove the pin housing from the lighter socket and only need to purchase the 2.5 mm BMW pins. Free shipping is limited to the continental United States. Shipping charges apply to international shipments.

TE/AMP Mate-N-Lok 2 Pin connector for use on laptop relay harnesses, etc. Includes two housing and 5 pins for 18-14 AWG wire.

TE/AMP Mate-N-Lok 2 socket connector for use on laptop relay harnesses, etc. Includes two housing and five sockets for 18-14 AWG wire.

Special relay harness designed to disable power to your LIND laptop charger when the motorcycle ignition is OFF. Enables charging the laptop battery when motorcycle is running, but shuts-off 50 seconds after ignition OFF via SPST relay. Due to varied locations for LIND chargers, unit comes with long wire leads and an adhesive cable tie base to mount relay where most convenient. Note that without this relay harness, each and every time the motor is turned-OFF, the LIND charger will remain ON for 30 minutes, draining the auxiliary battery. Reducing parasitic load extends the life of the auxiliary battery!

Power your BMW accessory socket directly from the main motorcycle battery with this accessory cable. Fused at 10A (std. power socket is 5A), the cable can be used with heated clothing, etc. Additionally, provides a direct path for battery charging (by-passing the buss system) if the BMW charger is not used (note: direct charging then only charges the main battery and does not close the charging relay to charge the auxiliary battery). Connects directly to main battery (where fuse is located) and runs up to the RH knee panel area for connection to the BMW power socket. Formerly BMW PN 71 60 2 409 958

Available January 2022. TFT dashboard mount for GTT Opticom 795. Bracket is laser-cut mild steel with powder-coating finish. Complete with expanding mounting rivets and special SS Plastite screws for GTT unit. Note: requires drilling four holes in the fairing dashboard - 2021+ R 1250 RT-P models with TFT display.

The Opticom Control Module enables installers to configure the installation based on department use policy for emitter systems. The OCM provides precise triggering of the emitter modules based on operation of the front emergency lights, regardless of flash pattern. The OCM also provides a selectable manual pause or activation function utilizing the fairing speaker mute switch (speaker mute function then disabled). The unit connects with the side stand to pause when "parked". Indicator light outputs are also provided for either Paused or Activated function using optional indicator lights. The user decides based on preference or department policy. Make selection below regarding activation and indicator light wiring so that unit will be pre-set to those preferences.

Tumble-finished stainless steel mounting bracket for the GTT Model 795 emitter module. Mounts to LH front protection bar on 2015+ RT-P models - will work with radar antenna forward mount. Complete with mounting screws and special SS Plastite screws for GTT unit.

Harness for connection of Opticom emitter module, utilizing the fairing speaker mute switch for relay activation of radio plug power source, in-line fuse holder with Opticom rated 7.5A fuse, includes side stand disable signal wire and 60" harness lead with generic connector to Opticom harness.