Replacement Hardware Set - TFT Display Mounts

The BMW Navigator mount was designed to enable mounting the traditional BMW Navigator GPS using a BMW Four Button cradle or a BMW Locking cradle (cradles & locks sold separately through BMW) onto the 2021 and later R 1250 RT-P models with TFT display. Also works with Garmin Zumo (select the 4-button cradle for this application). Not compatible with SAT radio antenna - if desired on unit with SAT radio antenna, antenna will need to be relocated* from the dashboard to the rear of the motorcycle for best reception. A new RFI shield has been developed to block much of the RF interference from the TFT display that was affecting the accuracy of the GPS signal (order separately below). Note: It has been reported that the Touratech GPS locking mounting cradle is heavier than the BMW cradles and may cause "bouncing" of the display.

Sourcing specialized electrical connections is not always easy, particularly when you only need a small number of items. FMS Accessories now offers a selection of hard-to-find connection parts to assist with the installation of police accessories or repair of police motors. If you do not find the item you are looking for, please contact us at info@fmsaccessories.com with a description and photograph of what you are looking for. 2-Position Pin Housing Code A is used for radio head extra speaker wire / map light / gun lock connections. 2-Position Pin Housing Code B is used for auxiliary LED light connections. 3-Position Pin Housing Code B is for GPS plug connections.

LED Flasher Connection 18-position socket housing with 18 sockets, for repair of wiring harness plug on 18-wire harness inside radio box. Typically due to fractured wires in flex harness between radio box plug strip and rear light pod (replace the flex harness when this happens). Replace over-heated socket housing and any overheated pins from the main wiring harness. Ensure that you have the tool to release the pins / sockets from the TE plug housings as well as a suitable crimp tool to ensure a proper / complete connection with the new pins or sockets on both the insulator and conductor crimps. Free shipping is limited to the continental United States. Shipping charges apply to international shipments.

ET381 LED Flasher Connection mating 18-position pin housing with 18 pins, for repair of wiring harness plug inside radio box. Typically due to fractured wires in flex harness between radio box plug strip and rear light pod (replace the flex harness when this happens). Replace over-heated pin housing and any overheated pins from the main wiring harness. Ensure that you have the tool to release the pins / sockets from the TE plug housings as well as a suitable crimp tool to ensure a proper / complete connection with the new pins or sockets on both the insulator and conductor crimps. Free shipping is limited to the continental United States. Shipping charges apply to international shipments.