LTI TruVision Lidar Holster

$345.00

Locking LTI TruVision Lidar gun holster for BMW R 1200/1250 RT-P complete with all mounting hardware included. Select the mount and orientation for your model in the options section. Key plunger lock secures gun from the thief of opportunity. Select the mount and orientation for your model in the drop-down list Mounting Bracket Type. All locks are keyed the same for easy use within the agency.

Availability: In stock

SKU: FMSA-GHTV

Mounting Bracket Type

Qty:

Installation Guide

Add To Estimate

Powder-coated aluminum holster with included steel mounting secures TruVision guns with less dust, dirt, bugs, etc. than open mounts. Aluminum constructions keeps holster from rusting if powder-coating wears off. Precision fit - adhesive pads are provided for the TruVision gun to minimize vibration. A rain cap is also provided to prevent water pooling on the display.

Unit is complete with M5 SS Torx mounting screws for protection bar threaded inserts. All locks are keyed the same for easy use within the agency. No adapter plate required for installation.

Note: If your protection bar is substantively bent in / back, you may not have sufficient clearance for this accessory to fit properly. Either bend your bar back out closer to the original position or replace the bar.

Free shipping is limited to the continental United States.
Shipping charges apply to international shipments.

Note: The addition of this or other accessories does not change the overall load limits of your motorcycle - always adhere to the manufacturer's recommendations for loading.

Customers who bought this item also bought

Fairing USB Outlet w/ Voltmeter & On-Off Switch

FMSA-EA-USB

USB sockets are becoming more commonly installed on motor fairings to assist officers with charging cell phones, helmet headsets, etc. However, many of the available sockets when connected to the fairing power socket confuse the BMW 2.5Ah battery charger by creating a small parasitic load. FMS has sourced a New quick-charge 3.0 technology USB socket (type A and C) with an On-Off switch, enabling the officer to turn-off the socket when not in use, therefore not creating issues during battery charging (particularly off-season storage when connected to the fairing power socket outlet). Additionally, the USB has a digital voltmeter, enabling the rider to see the state-of-charge of the battery that the voltmeter is connected to (based on the connection type selected). The voltmeter is also visible through the waterproof cover. When connected to the auxiliary battery power source, the voltmeter provides an excellent indication of your auxiliary battery state-of-charge as well as when the motorcycle is charging the aux. battery. Formerly BMW PN 71 60 2 446 871

$25.00

Lidar Gun Holster Adapter Plate

FMSA-MT-LGAP

FMS Accessories is pleased to offer a Lidar gun holster adapter plate for use on all MY 2015 and later R 1200 / 1250 RT-P models. This plate can be used to adapt earlier 4-bolt Lidar & radar gun holsters from MY 2014 & earlier models to the current K52 generation. The plate is constructed of 12 GA stainless steel, tumble-finished, complete with stainless steel hardware and can be fitted on either the right or left side protection bar. Not required for any FMS Accessories Lidar gun holster! Plate comes with washer-head Torx bolts for top mounting position as well as a counter-sunk Torx bolt when flush installation is required. To use countersunk bolt, you will need to countersink the upper bolt location depending upon which side of the motorcycle you are installing the plate. Original Plate MY2015-2018 Formerly BMW PN 71 60 2 409 956 Tight Fitting Plate MY2019+ Formerly BMW PN 71 60 2 452 407 797

From $22.50

Lidar Gun Adaptor Plate - Hardware Kit #4

FMSA-HDW-KIT4

Agencies have requested the special stainless steel hardware kits for their Lidar Gun Adaptor Plates. The kits includes four (4) M6 x 15 self-clinching studs, four (4) M6 serrated washer head nuts, three (3) M5 x 12 bolts and one (1) M5 x 12 Torx head counter-sunk bolt.

$7.95

Forward Stalker Dual Bolt 2015+

FMSA-AMF-FSD

Forward mount front antennas with two mounting holes for all Stalker antennas. For use with Water Bottle Holder or LH mounted Lidar Gun Holsters.

$59.00

FMS Accessories