LTI 20/20 UltraLyte Lidar Holster - Wire Form

FMS Accessories is pleased to offer a Lidar gun holster adapter plate for use on all MY 2015 and later R 1200 / 1250 RT-P models. This plate can be used to adapt earlier 4-bolt Lidar & radar gun holsters from MY 2014 & earlier models to the current K52 generation. The plate is constructed of 12 GA stainless steel, tumble-finished, complete with stainless steel hardware and can be fitted on either the right or left side protection bar. Not required for any FMS Accessories Lidar gun holster! Plate comes with washer-head Torx bolts for top mounting position as well as a counter-sunk Torx bolt when flush installation is required. To use countersunk bolt, you will need to countersink the upper bolt location depending upon which side of the motorcycle you are installing the plate. Original Plate MY2015-2018 Formerly BMW PN 71 60 2 409 956 Tight Fitting Plate MY2019+ Formerly BMW PN 71 60 2 452 407 797

Accessory connection plugs are used to connect accessories to the two-conductor plugs on the radio box terminal strip in positions 8, 9 and 10, referred in the BMW instructions as Accessory I, II or III. Three (3) two conductor socket housings along with six sockets are provided with each PN quantity selected. Formerly BMW PN 71 60 2 452 846

BMW 2.5 mm high current plug to connect radios and other devices to the radio power plug on your BMW motor. BMW plug Code A (black housing) supplied with two sockets for 14 - 18 AWG wire connections (w/conductor & insulation crimps). Formerly BMW PN 71 60 2 452 887

The radar connection plug is used to connect accessories (including moving radar) to the four-conductor plug on the radio box terminal strip in position 11, referred in the BMW instructions as Radar Connection on the K52 / 2015 - 2022 R 1200 / 1250 RT-P models. One four-conductor socket housing along with four sockets are provided with each PN quantity selected. Formerly BMW PN 71 60 2 452 849