Opticom Model 795 Mounting Bracket

An LED map light is a useful addition to your motor, particularly in combination with the notepad holder, providing visibility along with a sliding red color filter. Formerly BMW PN 71 60 2 452 859

Harness for connection of Opticom emitter module, utilizing the fairing speaker mute switch for relay activation of radio plug power source, in-line fuse holder with Opticom rated 7.5A fuse, includes side stand disable signal wire and 60" harness lead with generic connector to Opticom harness.

The rifle mount requires a mounting bracket. Theses brackets are available for right or left side mounting. Though right side is normally the preferred side as it is the dismount side, a left side bracket is also available. Standard RH or LH brackets accommodate barrel lengths up to 14". The NEW Long Rifle Mounting bracket (available in March 2021) accommodates barrel lengths up to 18" (note length includes barrel + suppressor if equipped). Note that using the Long Rifle Mounting bracket raises the rifle stock above the radio box lid height and may partially obstruct the RH side rear pod emergency light, depending upon view angle. Note when using RH long rifle mount w/long barrels, we suggest ordering the heat shield to protect the muzzle cup from excessive exhaust heat. Formerly BMW PN 71 60 2 452 840 RH

FMS Accessories offers the bushing and bolt kit needed to mount various accessories to the handlebars on the K52 / 2015 - 2022 R 1200 / 1250 RT-P including radar remote controllers, microphone mounts, cell phone holders, etc. The kit includes a special aluminum bushing, stainless steel washer and pan-head stainless steel Torx head bolt. The kit is available in standard length as well as +5 mm and +10 mm longer bolts for use when multiple brackets are attached to one side. The M10 Torx head bolt already has encapsulated thread locker on the bolt end - the Torx head enables you to apply the required 40 Nm of torque as specified by BMW without deformation. Formerly BMW PN 71 60 2 452 841