You have no items in your shopping cart.

Site Under Maintenance. Please do not place any orders for the time being. For urgent matters, kindly contact us at info@fmsaccessories.com.

Menu
Picture of Saddlebag Inner Cover - Lid Storage
Picture of Saddlebag Inner Cover - Lid Storage Picture of Saddlebag Inner Cover - Lid Storage Picture of Saddlebag Inner Cover - Lid Storage Picture of Saddlebag Inner Cover - Lid Storage Picture of Saddlebag Inner Cover - Lid Storage Picture of Saddlebag Inner Cover - Lid Storage

Saddlebag Inner Cover - Lid Storage

$59.00
PRICE BREAKS - The more you buy, the more you save
Quantity2+6+12+24+
Price$58.00$56.00$53.00$50.00
Utilize the valuable storage space inside your BMW police saddlebag lid with the FMS Saddlebag Inner Cover. Made in the USA of high quality Cordura, the cover attaches to the saddlebag lid with a special Velcro made to withstand the high temperatures of summertime heat. Ideal for keeping your motor well organized. Convenient for storing your rain gear, reflective vest, gloves, etc. Dual zippers with Velcro tab make it easy to load and unload. Fits BMW R 1200 / 1250 RT-P saddlebag 2006 to present, F 800 GT-P Saddlebag, New F 850 GS-P & F 750 GS-P with authority saddlebag. FMS Saddlebag Inner Covers are sold individually. The new hydraulic lid retention system requires use of the optional Lid Retention Straps. The inner cover otherwise does not fit elegantly with the hydraulic retention system.
Availability: In stock
SKU: FMSA-SBIC
Installation Guide

Add To Estimate

Important Note:  The latest product RT-P models from autumn 2022 have a new saddlebag lid retention system.  A hydraulic cylinder now supports / retains the lid.  This new system interferes with the inner cover design.  The hydraulic system must be replaced with the Lid Retention Straps for the inner cover to work properly.
 
Note:  The mating Velcro that attaches to the inner saddlebag lid does not achieve full strength until 72 hours after installation!  Surface must be cleaned with alcohol (pads provided) and flash-off prior to installation.  For faster adhesive cure, use 3M Tape Primer #94 on the surface after cleaning to promote maximum adhesion.  Small container availble under "Related Products" by scrolling down.
 
FMS Saddlebag Inner Covers are sold individually.
 
Fits BMW R 1200 / 1250 RT-P saddlebag 2006 to present, F 800 GT-P Saddlebag, New F 850 GS-P & F 750 GS-P with authority saddlebag.
 
No tools needed for installation - everything is provided.
 
Note: Saddlebag Inner Cover does not change the load limit per police saddlebag of 15 lbs.
 
Free shipping is limited to the continental United States. Shipping charges apply to international shipments.

Customers who bought this item also bought

Picture of Radio Power Connection Plug Code A

Radio Power Connection Plug Code A

FMSA-EL-RPP
BMW 2.5 mm high current plug to connect radios and other devices to the radio power plug on your BMW motor. BMW plug Code A (black housing) supplied with two sockets for 14 - 18 AWG wire connections (w/conductor & insulation crimps). Formerly BMW PN 71 60 2 452 887
$10.00
Picture of Side Stand Extension

Side Stand Extension

FMSA-MT-SSE
FMS Accessories offers the side stand extension for the 2015+ R 1200 / 1250 RT-P. This extension not only reduces the likelihood of the stand sinking into soft pavement or grass, but provides the added bonus of easier side stand deployment! The side stand extension enables the rider to access the stand from behind the rider footrest, "sweeping" the stand to deployment without taking your eyes off the violator. No more poking your heel between the rider's footrest and the gear shift pedal ... you can saw that peg off! Since the side stand extension is bolted to the top of the stock side stand, it also does not affect the lean angle nor drag on the ground when cornering! One of the many "must have" items!
$36.00
Picture of Accessory I-III Connection Plugs

Accessory I-III Connection Plugs

FMSA-EL-ACP
Accessory connection plugs are used to connect accessories to the two-conductor plugs on the radio box terminal strip in positions 8, 9 and 10, referred in the BMW instructions as Accessory I, II or III. Three (3) two conductor socket housings along with six sockets are provided with each PN quantity selected. Formerly BMW PN 71 60 2 452 846
$9.50
Picture of Notepad Holder

Notepad Holder

FMSA-MT-NPH
A notepad holder / bail is a very handy accessory for holding notes, directions or other documents either when parked or while riding. Constructed of formed and tumbled stainless steel, with a stainless steel clip bail riveted to the base. Includes, aluminum spacers, longer stainless steel bolts and 50 sheet notepad. Replacement notepads are available separately in Replacement Parts. Formerly BMW PN 71 60 2 452 888
$48.00

Related products

Picture of Replacement Velcro Strip - Saddlebag Inner Lid Storage

Replacement Velcro Strip - Saddlebag Inner Lid Storage

FMSA-SBIC-RVS
Replacement 45" Velcro strip attached to saddlebag inner lid storage. Includes alcohol wipe. Clean the surface thoroughly with an alcohol wipe and wipe dry with a clean cloth prior to installation. Allow the Velcro adhesive to "cure" for 24 hours prior to using the Inner Cover. Accessories do not change the factory recommended load limits of the motorcycle. Free shipping is limited to the continental United States. Shipping charges apply to international shipments.
$9.00
Picture of High Strength Lid Retention Straps (Set of 2)

High Strength Lid Retention Straps (Set of 2)

FMSA-MT-LRS
High Strength Lid Retention Straps were developed to provide more secure retention of the saddlebag lid, virtually eliminating the risk of retention cord stretch / breakage resulting in lid hinge binding, while providing more support when items are stored in the lid cavity using the Saddlebag Inner Cover Lid Storage. Additionally, the retention straps can replace the hydraulic lid retention mechanism on the newest models to enable use of the Saddlebag Inner Cover Lid Storage. Retention straps are made from 3/8" nylon webbing, providing exceptional strength and resistance to stretching. They are anchored at each end with a crimped M5 ring terminal and stainless-steel hardware. Saddlebag Lid Retention Straps sold as a pair (2) and include all necessary hardware.
$29.90
Picture of 3M Adhesion Primer 94 / Add-On Item to Saddlebag Inner Covers

3M Adhesion Primer 94 / Add-On Item to Saddlebag Inner Covers

FMSA-SBIC-P94
3M Adhesion Primer 94 can be used to improve the adhesion of the Velcro strips in the saddlebag lid cover kit. The small individual tubes are .022 fluid once size perfect for individual use. Follow the directions on the attached 3M Information Sheet. 3M Adhesion Primer is available in larger sizes for shop use and can be purchased directly from Amazon or other sellers.
$2.50
Information
Customer service
Follow us
Powered by nopCommerce
Copyright © 2025 FMS Solutions, LLC. All rights reserved.