Video Camera Mount

FMS Accessories is pleased to offer a Lidar gun holster adapter plate for use on all MY 2015 and later R 1200 / 1250 RT-P models. This plate can be used to adapt earlier 4-bolt Lidar & radar gun holsters from MY 2014 & earlier models to the current K52 generation. The plate is constructed of 12 GA stainless steel, tumble-finished, complete with stainless steel hardware and can be fitted on either the right or left side protection bar. Not required for any FMS Accessories Lidar gun holster! Plate comes with washer-head Torx bolts for top mounting position as well as a counter-sunk Torx bolt when flush installation is required. To use countersunk bolt, you will need to countersink the upper bolt location depending upon which side of the motorcycle you are installing the plate. Original Plate MY2015-2018 Formerly BMW PN 71 60 2 409 956 Tight Fitting Plate MY2019+ Formerly BMW PN 71 60 2 452 407 797

The video system icon plug is used to connect the video icon cable from the rear pod flasher board. This enables the user to tap into the 12V icon signal for emergency lights, left & right turn signal and brake light. This is often used to trigger body cameras as well as provide on-screen icons for full video system use. Formerly BMW PN 71 60 2 452 843

FMS Accessories offers the side stand extension for the 2015+ R 1200 / 1250 RT-P. This extension not only reduces the likelihood of the stand sinking into soft pavement or grass, but provides the added bonus of easier side stand deployment! The side stand extension enables the rider to access the stand from behind the rider footrest, "sweeping" the stand to deployment without taking your eyes off the violator. No more poking your heel between the rider's footrest and the gear shift pedal ... you can saw that peg off! Since the side stand extension is bolted to the top of the stock side stand, it also does not affect the lean angle nor drag on the ground when cornering! One of the many "must have" items!

Accessory connection plugs are used to connect accessories to the two-conductor plugs on the radio box terminal strip in positions 8, 9 and 10, referred in the BMW instructions as Accessory I, II or III. Three (3) two conductor socket housings along with six sockets are provided with each PN quantity selected. Formerly BMW PN 71 60 2 452 846